|
|
|
New 6" LED Strip Light for 2011 season. Brite Lites has developed a larger strip light with 12 Super Bright LEDs to make it a compact light unit with 2 rows of 6 LEDs to make a great stand alone taillight and brake light. The brightest LED taillight we have ever built.
-Light is 6 3/8" long, 1 7/8" tall, and 15/16" deep, with the 3 wires exiting in center back of unit. Chrome bezel is removable if not desired.
-Standard 3 wire connections for all typical DC 12v positive polarity electrical systems. (note: Polaris CFI sleds are negative polarity and require the use of our CFI adaptor to function brake light)
-Available in clear lens with red 2 function LEDs Run & Brake
-MSRP is $29.99 each light and are currently available for shipment!
9-23-2010
Agricultural and Industrial HID work lights are here!! Bluhm Enterprises has a full selection of HID work lamps in sqaure and round plastic body with stainless stud mounts for use anywhere. These lights will be 3 to 4 times brighter than stock lights and with no filiment to burn out, these will last for years.
Features we are promoting on this light unit are:
-Light is built with ballast & electrode in one housing, so only 2 wires are needed to connect.
-Ultra Bright HID in 6,000K light for maximium light output.
-No need for wiring or connecting external parts.
-Available in clear lens for pencil beam or refractor lens for wide flood light.
-Lights specifically designed for Industrial/Agricultural applications.
This light kit comes complete as a pair for $299.99 (4" kits) or $349 (6" kits). Mounting brackets and mounting bolts are included. External wiring is not included with lights. To order, Call or shop our HID/Fog light Page, and in the HID Work Lite section, the kits are there.
|
|
-- 03/18/2010 --
|
|
|
|
|
|
Attention Dealers and Distributors of Brite Lites LED Accent Lites!! Bluhm Enterprises has created a versitle counter display to help show our flexible LED strips and round Accent LED modules. Each display is on a curved aluminium panel 16" x 16" and has 6 12" LED strips and 6 round LED modules, all wired together and complete with a 12 volt power transformer for standard 110v. wall power.
This light kit is available to dealers to purchase for $129.99. The kit is also available as part of a promo buy-in package where the display can be shipped with your order for no charge. The kit comes as pictured, completely assemboled and includes the power transformer, so you just set on the counter and plug in. To order, call for more details.
|
|
-- 03/18/2010 --
|
|
|
|
|
|
Look at this Cat!! It glows in the dark!! These customer photos show the Brite Lites LED strips and round Accent modules on a new Arctic Cat snowmobile. With a little creativity and some effort, you too can transform your vehicle into a head turning one of a kind machine.
This sled has 2 of our 36" LED accent strips (p/n BL-ASLEDG @$39.95ea) and 2 of our 8 piece round Accent Lite Kits (p/n BL-ACLEDG @ $39.95ea) giving 16 round LED modules and 6 feet of LED strips for a total cost of $160.
|
|
-- 03/18/2010 --
|
|
|
|
|
|
Attention Ice Oval ISR Racers!! Bluhm Enterprises and Wahl Brothers Racing, have teamed up to produce the brightest and most compact LED taillight system, ever seen with a totally self contained battery system- all inside the taillight lens!! This unit comes after much research, and determination to build a quality taillight that adds safety. Our new system runs on battery and will last for days without changing the battery! Orders are being taken now for the latest LED taillight system on the market. If you are racing, the new ISR rules require a LED taillight that is ON anytime the sled is on the race surface. This new taillight is the answer. A simple and lightweight design allows for quick installation.
Features we are promoting on this light unit are:
-Complete and sealed LED Race Light system
-Ultra Bright LED Board with battery enclosed in compact & lightweight aluminium bracket with on/off toggle switch.
-No need for wiring or connecting external parts.
-Operates for days on battery, change battery in seconds.
-System designed specifically for Race needs, can be modified to have brake activated from sled and "ON" function from LED battery.
This light kit comes complete and ready to race for $79.99. The kit comes as pictured, completely assemboled and includes the battery, so you just mount to the sled chassis, flip the switch and you are racing!! Super easy. To order, Call or shop at Wahl Racing.com, or go to our Snowmobile Page, and in the LED Taillight section, the kit is there.
|
|
-- 11/20/2009 --
|
|
|
|
|
|
Here is our new compact travel, emergency kit 9 volt LED flashlight. It is the diameter of a 9 volt battery and just snaps on the top of any standard 9 volt battery. Super compact and great for multi uses. Will run for days on end, will flash in the flash mode for 10 days at 20 below zero with a standard battery attached.
This light comes 2 pieces in one package for $9.99. The light is a 3 position switch ON-OFF-FLASH for regular use, or a warning flash to let people see where you are parked (like along a trail at night) or for emergency rescue help by letting it flash into the open sky. Batteries are not included in the package. To order, go to our Lighting Accessories Page, and in the LED Flashlight section.
|
|
-- 10/28/2009 --
|
|
|
|
|
|
Check out the latest in LED TRAILER lighting. We have a line of clear lens "EURO" look trailer LEDs for most all replacement light needs. Our clear lens oval trailer stop/run lights are very cool with RED LEDs to make a very modern look. Our 15" long light strip is a great center light, or side lights for an enclosed trailer.
Check out the Trailer LEDs page and the new EURO LIGHTS section for all of these new lights. We are expanding our options continually to make for better service to our customers.
|
|
-- 10/28/2009 --
|
|
|
|
|
|
Here is the long awaited Polaris Dragon LED Taillight Insert!! We have worked for 3 years to design and perfect the square taillight on Dragons and all new Polaris machines.
In all, this insert is a simple upgrade. If you have a 2007 or newer Polaris, with the taillight like above (red square lens), then the Insert is a 10 minute upgrade. All you need to do is unscrew the lens, pop out the stock 1157 bulb, add the plastic spacers and plug the insert in. 2 models are available for the CFI engine machines (an polarity adaptor is needed & built in) and a non-CFI or regular Insert for the HO & 500cc engines. Price is $29.99 for the regular and $39.99 for the CFI Insert w/adaptor built-in. Order yours now to get on the list for shipment. These are on batch 2 and will be finishing the 3rd week of November. Orders will be filled from date recieved. Order yours on the snowmobile page, Taillight LEDs (the strip LED lights are pictured) and ADD to the Cart there.
|
|
-- 10/28/2009 --
|
|
|
|
|
|
Check out the latest in LED lighting. We have a new 4 piece ultra thin, flexible LED strip kit that is designed to mount around the engine and accent the bike without being seen. The bike here has the purple Multi Pak Accent LED Kit installed.
In all, this bike has one 4 piece kit, $60 of LED's on it and really stands out in a crowd. You should see this thing at night. We mounted a rocker switch under by the key to allow easy on-off capability and this thing gets the looks!! It uses almost no power, so we leave it on for hours out on main drag while having a few drinks and it's pretty cool.
The picture shows the actual 4 piece Accent kit we sell. Your getting 2 strips that are 12 inches long, and 2 strips that are 8 inches long. For motorcycle lighting, or LED accents, this kit is very versitile. Each strip comes with 5' of lead wire, simple positive and negative connections, and you can cut the strips shorter in case you want a shorter piece. (If you want longer strips - we have a long 36" kit in the snowmobile section)
To order, go to the Motorcycle or Lighting Accessories page and add one to your cart. Available in Red, Blue, Green, Yellow, White, & Purple.
|
|
-- 02/23/2009 --
|
|
|
|
|
|
NEW & IN STOCK!! We have now in stock a larger version of our 2 function surface mount LED Taillight unit with the clear lens. This unit is a 3 wire pick-up to run your running lights and an extra brighter circuit, like turn lamp. It is less than 5 inches long and uses the brightest 8 square LEDs in the market. Weighs less than 3 ounces!! These can be installed as a stand alone taillight on a mountain or mod unit, or as an extra taillight on luggage rack or on towable sled. Only $29.95 and are located in the Lighting Accessories with the other surface LED taillights.
 
|
|
-- 11/29/2008 --
|
|
|
|
|
|
|
|
|
|
Here are the pictures of the HID kits we just finished for ATV/UTV machines. If you have a RZR, Ranger, Sportsman, or any other ATV/UTV that comes stock with a 880 series bulb (894, 886, 885) this is the kit for you. Look at the following pictures and see for yourself the difference HID makes for off-road!
The picture shows the major parts of a 1 beam 880 bulb kit. All kits from Brite Lites are built with slim compact digital balast and come with everything you need to complete the install in very little time.
The picture shows the major light output difference from a stock halogen bulb, on right side, and our new HID kit on the left side. The HID beam is more intense and much whiter. All Brite Lites HID kits operate at 6,000 degrees Kelvin (that is a color temperature scale for whiteness) More than 6,000 gets a purplish color, and less than 6,000 is yellowish.
The picture shows the light coming from our Laser Lite Brite Lites Xenon Gas bulb (right side) is whiter than the stock halogen, look at the picture above for reference, but the HID on the left side is considerably brighter. ATV/UTV HID kits come with everything you need to make the conversion and start at $299. Go to our Motorcycle page or our HID/Fog Light page for additional information and to order.
|
|
-- 03/10/2008 --
|
|
|
|
|
|
Looking for true HID?? Brite Lites now carries a full like of Xenon Arc/Digital Ballast HID conversion kits. These kits are designed to be a plug-n-play installation that leaves no trace (when you sell the vehicle you just pull the kit out), and is easy to do in 30 minutes with simple tools. No cutting wires or splicing, just connect the stock headlight harness to the ballast and install the HID arc bulb in the stock headlight housing and you are about done.
The picture shows the major parts of a 2 beam (Hi & Low) H4 kit. All 2 beam kits from Brite Lites are a servo motor controled adjustable beam, so you keep the Hi and Lo beam like your stock bulbs (these are 9003/H4, 9004, 9007, 9008/H13) that are fould in new trucks like Hummer, Ford, & Dodge, and many others. We also have single beam HID kits for ATV's and other applications like driving lights on cycles. Look at our HID/Fog Lite page for complete details. Kits start at $299 for single beam systems.
|
|
-- 02/21/2008 --
|
|
|
|
|
|
The following are a few pictures of our latest LED sled project. This Polaris Dragon RMK has all LED lights on it. There are about 300 individual LEDs on it and the headlight is a LED system. It is our first vehicle to utilize a 100% LED lighting load. Oh, with the headlight on and all LEDs in the brightest mode, the sled draws a total of 3.2 amps, which is less that the power needed to run a single headlight bulb on low beam. Just thought we would share.
LED Brite Lites include our new LED Strips in blue, LED Accent modules in blue, a 4" clear lens LED taillight, dual LED projector headlamps, LED Dragon EYEs kit, LED gauge back lighting, and LED Accent modules for under hood light.
This last picture shows our new Dragon "EYE" kit. The LED kit allows the user to flush mount a small "EYE" LED on a hood, dash, or other surface where there is access to from the under side. The kit includes 2 LED "EYEs" and instructions to light up your monster. These kits are found on our snowmobile page in the accessories section.
|
|
-- 02/21/2008 --
|
|
|
|
|
|
Brite Lites has finished a Dragon/CFI snowmobile taillight wiring adaptor that will allow riders to install a LED taillight on any Polaris CFI sled, like the Dragon or any Clean Fire Injected sleds.
Because Polaris is using a non-standard wire routing on the CFI sleds built since 2005, replacing the stock taillight with a LED version has been next to impossible. LEDs are a great way to provide light and are very compact, but they are very picky when it comes to how they are powered. LEDs need DC power, and the polarity needs to be normal. A reverse polarity or switched ground and constant power, will make a LED taillight act like it is burned out. The LEDs will not light in both circuits (run & brake).
Our new CFI Adaptor is a simple in-line adaptor that you plug into the stock wiring harness (at the seat or end of tunnel) and wire the three output wires to your new Brite Lites LED. Wires are coded the same so wiring is a snap. Production runs are underway and product will start shipping next week. The Brite Lites CFI Adaptor is $19.99 and will be shipped on a first in, first out basis. Part number is BL-CFILEDA and is available in the LED sections (with the 4" strip taillight)and can be ordered on our website shopping cart or by calling.
|
|
-- 12/13/2007 --
|
|
|
|
|
|
BL-TRLEDR, the 4" clear lens LED taillight is now back in-stock. All distributors have stock as well. 1-15-08
|
|
-- 12/11/2007 --
|
|
|
|
|
|
Brite Lites Accent LED Kit - 8 piece round modules Installation option:
I had many people asking on the recommended methods to mount our Brite Lites Accent LED kit on snowmobiles. In this sled, we mounted a module at the foot sturrip, 2 under the hood, and the 4th module out on the shock tower area pointing forward. We repeated this for the other side to use up both strings of modules in the 8 piece kit. The 8 piece kit sells for $39.95 and is available in 6 colors (blue, red, green, yellow, white, & purple)
For a long life and trouble free use, we apply plenty of clear silicone sealant arount the modules and on any wires that are exposed. Any modules under the hood are zip tied to their mounting point and siliconed in place to keep them pointing tward a vent to give the most light off. A switch is recommended to be installed (not included in kit) to allow the operator to turn off the lights when not needed. Installation to power is simple by attaching power to the lighting circuit, voltage regulator, or to a battery. All 8 modules draw almost no power, at less than 1/4 an amp.
|
|
-- 10/23/2007 --
|
|
|
|
|
|
Here's a quick snapshot of our portable Brite Lites store for 2007. In the picture, check out the hot and unique strip LED lights on the sled tunnel! These babies are a totally new concept in LED lighting, being a totally flexable strip and 1/8 inch thick! The strips are 36" long by 1/2" wide, and can be cut to desired length with a sissor. All they need is a simple 12 volts of power to light. You can run them from a voltage regulator, lighting circuit, or right from a battery if you have one. These are so hot, that they will only be available at the shows this month and will show up on-line and at distribution centers later this season. The strips are available in 6 colors (blue, red, green, yellow, white, & purple) and apply to any smooth surface with a high grade 3M two way tape. Snowmobile, motorcycle, RV, & boats are just a few examples of where the new strips can be used. We are selling the strips for $39.95 each strip and they come with a 5' lead wire and the 3M mounting tape. A switch for turning the lights on/off is recommended and not included in the kit. We also have a full line of Accent LEDs in round modules, LED trailer lights, and our orginal Brite Lites Xenon Gas headlight bulbs.
Next stop is SEMA in Las Vegas then off to the snowmobile show in Novi Michigan, November 2-4.
|
|
-- 10/23/2007 --
|
|
|
|
|
|
|
|
|
|
We have now in stock a Amber version of our 2 function surface mount LED unit with the clear lens. This unit is a 3 wire pick-up to run your running lights and an extra brighter circuit, like turn lamp. It is less than 4 inches long and uses the brightest 6 square LEDs in the market. These can be installed on the surface, or hidden behind a grill work in a custom car for a clean look. Only $19.95 and are located in the Lighting Accessories with the other surface LED taillights.
|
|
-- 05/21/2007 --
|
|
|
|
|
|
At Bluhm Enterprises we are moving to be a complete lighting shop for all 12 volt lighting needs. Our Legendary Brite Lites line of headlight bulbs have been a staple for our company for 10 years. With our expansion into the motorcycle and ATV lighting market, we have now added more than 50 LED lighting items to fullfil many additional lighting needs. We have taillights available in the most innovative styles and flexable enough for most all applications out there. Our trailer LED line is so superior to others, that the top trailer manufacturers are working with us dorectly for their LED lighting needs. Our goal is to become the best at what we do and our promise to you, the consumer is to keep working hard and pushing product development so we will be first with whatever the market calls for in lighting. Take a look around and see, and feel free to call us at any time.
Thanks for checking in. Kevin Bluhm- owner Brite Lites & Bluhm Enterprises
|
|
-- 09/25/2006 --
|
|
|
|
|
|
ATTENTION FORD & DODGE TRUCK OWNERS: Bluhm Enterprises has now finished our first build of the new headlight bulb that you have been asking for since 2004. The Ford F-150 was the first to utilize a new headlight capsule, the 9008. The 9008, or H13 headlight bulb, is very similar in shape to the old 9007 bulb, but has large plastic tabs, or wings, on the sides or the base to aid in aligning the bulb for installation. These are available in DOT approved wattages and in the Hi-Power Off-Road variety. They are in stock and located on the automotive page, listed with the twin headlight listings for DOT & Off-Road sections.
|
|
-- 09/14/2006 --
|
|
|
|
|
|
Fall snow shows are right around the corner. This year, like the past few, we will have a limited number of snowmobile shows that we will have a display at. The first show we'll be at is the Big East snowmobile show in Syracuse NY, October 5-7. Two weeks later, on the weekend of October 20-22, we'll be set-up in the corner of the Snowmobile USA show in Milwaukee, WI. Our final stop this fall is in Novi at the Michigan show, part of the Snowmobile USA tour, the weekend of November 3-5.
Booth Locations: - Just get close and look for the big BRITE LITES banners!
Syracuse - #1211 (new location for us- MAIN Level by Shade Tree)
Milwaukee - #100 (same location is corner of new building)
Novi - #205 (about the same booth as last year in the new building)
These shows are a great way to stop by, visit in person, check out our latest projects and items, and pick-up a new brochure of all our products. We have been displaying our products at the snowmobile shows since the fall of 1993 and have seen many changes, many companies come & go. We are one of the oldest companies running the circuit and we are proud to be able to help snowmobilers see better with our genuine Brite Lites headlights and our complete line of LED products. If you are thinking about attending a show, be sure to look us up.
|
|
-- 09/14/2006 --
|
|
|
|
|
|
LED's are becoming a bigger part of our business and demand has never been higher. If you are thinking about upgrading your lights on your trailer, the taillight on your bike or sled, we have the largest selection of LED units to replace stock OEM lights, or to supplement what came stock. Look up our lighting accessories page to get an idea of what we have for adding LED light to your vehicle and browse our trailer LED page for new upgrades for your trailer to make it more maintenance free and a custom new LED look that won't leave you struggling to get some lights to work on your first trip.
We also have our strip dual function LED's available and are very popular. After a couple of seasons of testing, we have a small & long strip taillight LED unit that is very versitle and can be mounted on almost any semi flat surface. Browse around and you'll find a LED that will fit on almost any application. We have heard from folks that are using our LEDs and they are being added to golf carts for road use, the inside of enclosed trailers for interior lighting, on boats for rail lighting, on choppers for indirect diffused lighting, and almost anywhere you can mount a LED unit on a vehicle. The main points of a LED are they draw virtually no electricity, so adding them to a small charging system is not a problem, they last for about 10,000 hours of use, so they are almost a "forever" replacement, and they are vibration and shock resistant because they have no fillament to break, making LEDs almost the perfect solution for any mobile application. Look for yourself and you'll agree, our line of Brite Lite LEDs are the widest selection and assortment of choices for recreation vehicles anywhere. We are powersports enthusiests working hard to improve lighting options. If we don't have it, you most likely won't find it.
|
|
-- 09/14/2006 --
|
|
|
|
|
|
Honda motorcycle taillight and turn signal bulb LED replacement notes. If you have a newer Honda model street bike or Gold Wing, and are changing out the stock 3157 taillight or turn signal bulbs to our LED 360 degree units, please read the posting below for careful instructions to make proper fit of the new replacement LED units.
Honda uses a all glass 3157 bulb in their bikes and this is NOT an ANSI standard automotive light bulb, and will cause socket restriction issues when upgrading the lights on this type of bike to an automotive plastic injection molded 3157 bulb, or an industry standard type. All of our Brite Lite 360 degree LED taillight bulbs are SAE & DOT approved, and meet ANSI design standards for automotive use, but the all glass bulb Honda uses has a thinner base due to the all glass construction, and causes the LED replacement bulb to fit too tight in the base before bottoming out all the way down, like the stock glass bulb does.
While the replacement bulb will light and operate without modifications, it is very suseptable to vibrating out and loosing contact. Several instances of this have been reported and a modification is recommended to better remedy this situation and make the replacement 360 degree LED fit snug, and all the way into the stock Honda bulb socket.
Basically, the black plastic base on the replacement Brite Lite 3157 base, needs to be trimmed down on the edges and sides to make it narrower and thinner, like the stock all glass bulb. By using the stock bulb as a guide, one can take a dremel tool and grind off plastic to make the LED unit fit deeper into the stock bulb socket. Once the bulb is trimmed to fit deep in the socket, dielectric grease can be applied to make good contact and avoid coorision. The other option would be to replace the stock Honda bulb sockets with automotive 3157 sockets. This is a lengthy process as the wiring harness needs to be altered and is not recommended.
If you have a Honda and have additional questions, feel free to contact us and we can show you a picture of one LED that was reciently completed to fit the Hondas and they work very well. (Thanks to Arnie in Mankato for taking the time to make us up a spare!)
|
|
-- 09/14/2006 --
|
|
|
|
|
|
LED Product development update: I have a lot, and a lot of stuff going on in this area, and wanted to give an update. Many have asked for a LED brake light unit for sleds/snowmobiles that will fit almost any application, without being too big, or too expensive. We have produced a 4" strip LED light that has 2 functions (brake & run) and it will be fitted with a clear lens and red LEDs to give a super nice look. The price will be pretty close to $19.95 (not 100% but it's going to be close) I will post a picture and the part number the day we have testing done and parts available. We are looking at 3 weeks out at this point.
We are also getting a larger strip center light for trailers finished up. This LED unit is 13.5" long and will be a 2 function unit as well. The time on this unit is the same, about 3 weeks out, and price is estimated to be $39.95.
Kevin
|
|
-- 11/23/2005 --
|
|
|
|
|
|
IT'S HERE!!!! As you may have noticed- Our NEW revised web site is now on-line. We have taken considerable time to focus, redirect, and simplify the information and products contained on our site. At Bluhm Enterprises, we are going to continue our focus of LIGHTING and lighting components by adding the latest in LED technology. We are also working hard to develop LED lighting needs for off road vehicles, mainly snowmobile applications.
When you look thru our site, you will notice that we have made categories for lighting and accessories based on the type of vehicle associated with the need. So if you are looking for lighting for a snowmobile, the snowmobile page has a new simple way to see all the snowmobile related products that we carry. This is very similar to the motorcycle page we added a few years ago. We not have an expanded automotive page, as well as a couple of catch-all pages of lighting accessories and fog lights. These items can fit any need and are very universal for many vehicles.
This is going live today and we still have a few things to polish to make the images and artwork look really nice, but we wanted to get this out before the snow season gets going. Thanks for looking, and if you have questions about the site, our products, or want to give your two cents, hit the contact us button and fire off an email.
Thanks, Kevin at Bluhm Enterprises
|
|
-- 11/23/2005 --
|
|
|
|
|
|
The all NEW Accent LED lighting kits are now available to dress up or customize anything that runs! Our new 8 piece LED accent light kit utilizes 40 Hi-output LEDs in 8 round capsules to allow for maximum flexability of mounting and illumination. The LEDs are configured in 2 strings of 4 LED units and have 3M adhesive backing to allow mounting on any surface. The LEDs draw virtually no electricity so the wires are small and will work on motorcycles, ATV's, snowmobiles, and automotive applications. Wiring is 22 gauge dual wire (positive & negative wires), super thin and can be cut to add wire, shortened, run 1 module or 50 in one string. It is the most versitle lighting product you can find for 12 volt applications.
The kit (a red kit is pictured above & is illuminated)contains the 8 weatherproof sealed LED units and mounting hardware to secure the lights in the most remote locations. Works on any 12 volt system, with or without a battery! LED modules can be strung together and add as many, or as few units as you wish to customize your application.
In the dark, the LEDs shine very bright and are available in the most popular colors: Red, Green, Blue, Yellow, and White. LEDs can be wired directly into the run circuit, or into the brake circuit for added taillight safety.
The LED capsules are just larger than a quarter so they can be mounted on frame rails, under shrouding, or anywhere you would like. The 3M mounting adhesive pad is the best mounting material available!
Part numbers are: Red- BL-ACLEDR, Green- BL-ACLEDG, Blue- BL-ACLEDB, Yellow- BL-ACLEDY, White- BL-ACLEDW
|
|
-- 03/29/2005 --
|
|
|
|
|
|
TRAILER LED Lites are HERE!! We have worked on the LED products for several years to develop the finest LED lighting products and we are now ready. Our Trailer LEDs are the brightest, most reflectant units in the USA today! All trailer LEDs are DOT & SAE compliant and are simple replacement units for the stock incandescent lights that came with your trailer. All trailers from the smallest unility trailer, to your boat trailer, to the monster 5th wheel enclosed race trailers use sealed lights. Typically, to replace them they are mounted in a rubber gasket and use a plug type wiring harness. in about 5 minutes you can replace the lights and have the best lights in the world. Remember: LEDs draw virtually no power, last for thousands of hours of use, and are vibration resistant. To order, go to the Trailer LED screen and they will be listed there.
Here is the Oval Stop/Turn/Run taillight in Red or Amber. Uses 13 square LEDs and has a high level of reflectance. Simply the best. MSRP is $19.99 each light. White/clear oval back-up lights are available also at an additional cost.
Here is the Round marker light in Red or Amber. These are available in a 2" or 2.5" round size. Same as the oval light in features and quality. MSRP is $8.99 each light.
Part Numbers are 2" Red- BL-TRLEDRR2, 2" Amber- BL-TRLEDRA2
2.5" Red- BL-TRLEDRR3, 2.5" Amber- BL-TRLEDA3
Lastly, here are the Rectangular marker lights in Red, Amber, or White. These are the standard marker size of 2.5" long x 1 3/16" wide. Can be used on trailers, trucks, or anywhere you want extra light. Use the bullet connector wiring (2 connectors)built into the back like the others. The White is designed for illuminating the license plate or as back-up lights. MSRP is $7.99 each for Red or Amber, White is $9.99 each light.
Part Numbers are: Red- BL-TRLEDSQR, Amber- BL-TRLEDSQA, & White- BL-TRLEDSQW
All Trailer LEDs can be found and purchased in the Trailer LED section on our webpage and shopping cart.
|
|
-- 03/18/2005 --
|
|
|
|
|
|
It's 2005 and we have been working up some GREAT new LED products. We have just finished extensive testing on a new taillight LED that will now allow ANY machine that uses a 1157 taillight bulb to utilize LED technology! This means that all new Cats, Ski Doos, Yamahas, and the new Polaris sleds use 1157 bulbs and now there is a great upgrade available for it. 13 Hi-Performance LEDs are arranged and light in a red color to be used with a red taillight lens and give the brightest red light possible. (white light LEDs would give a pinkish color thru a red lens).
Our new 1157 LED is a totally new design that utilizes LEDs mounted all around the base of the bulb to give light in all directions, so the angle in which the bulb mounts is not important. (traditional LEDs only face out one direction and the bulb has to face directly rearward). The 1157 model is with a round metal base and two offset metal tabs to allow for a push & twist installation. There are two contact points for run and brake circuts. This is also available in the single contact 1156 type, used for turn signals on bikes.
The benefits of the LEDs are still the main reason we are investing so much time into them. They are vibration resistant, last 10,000 hours, and provide maximum power to the other electrical components and engine- to maximize your performance.
We also have the new all around LED available in the new 3157 base that is found on the new Polaris 900 Fusion, RMK, and the modular seat XC's with the Euro twin taillight. It is also found on the new Polaris Sportsman SPIRIT chassis (the new chassis for 2005). The 3157 is the model that has a flat plastic base that pushes into the socket, like all modern automotive taillights). The 3157 is also being used in some of the new Harley Bikes. The single contact 3156 is also avalible for turn signals on bikes.
Part numbers are: 1157 Red - BL-1157360R, Amber - BL-1157360A, White - BL-1157360W
3157 Red - BL-3157360R, Amber - BL-3157360A, White - BL-3157360W
1156 Red - BL-1156360R, Amber - BL-1156360A
3156 Red - BL-3156360R, Amber - BL-3156360A
|
|
-- 01/11/2005 --
|
|
|
|
|
|
If you are going out to the show show, Here is what to look for. We have a huge display and are easy to find at the shows. Under the Brite Lites banners is the only place you will find genuine Brite Lites products and the knowledge to get you the right light bulb for your needs. Stop by and say hi! The next show is in Michigan at the Novi Expo Center on November 5th-7th. Hope to see you there.
|
|
-- 10/22/2004 --
|
|
|
|
|
|
TUFF PAK's are HERE!! We now are offering all of our Xenon Gas H4, P43t base Brite Lites, in a new sturdy plastic Tuff Pak for added value and twin pack savings. Our industry leading Brite Lites are now available for your needs in single packaged units like always or in our new TUFF PAK. The TUFF PAK is a snap together plastic case that is crush proof and will protect your Brite Lite spare bulbs (or the factory ones you have replaced with Brite Lites).
All TUFF PAK's come with attractive four color chrome mylar decals to make the Brite Lites inside sell themselves! Our TUFF PAK H4 Brite Lites are distributed thru Parts Unlimited, Drag Specialities, LeMans Corp, Dennis Kirk, and Western Power Sports. If your dealer doesn't carry Brite Lites, ask them to order some in- it will be worth the order for them and you.
|
|
-- 08/02/2004 --
|
|
|
|
|
|
Brite Lites are now available most anywhere motorcycle and snowmobile parts are sold. We currently sell our Brite Lites to five of the major parts distributors so nearly and dealer can order in any of our 50 plus Brite Lites and Brite Lite assessories. Distributors that stock Brite Lites include Parts Unlimited, LeMans Corp, Dennis Kirk, Western Power Sports, Bell Industries, and Hi- Performance Engineering. All of these distributors have Brite Lites clearly displayed in their catalogs and any legitimate dealer can order up anything you need.
If you have difficulty locating a dealer to assist you in getting Brite Lites, feel free to contact us and we will be glad to assist you in getting the items you need.
|
|
-- 07/29/2004 --
|
|
|
|
|
|
Bluhm Enterprises is expanding our web site to include the motorcycle and ATV market along with the snowmobile market that we have been heavily involved with for the past 10 years. With the inclusion of motorcycles and ATV's, you will be able to look at Brite Lites and accessories that are directly applicable for street bikes, customs, cruisers, rockets, and wheelers. The new Motorcycle and ATV page shows products grouped by type and has detailed information for each item to better assist in the decision process. If you need aditional assistance, feel free to call.
|
|
-- 07/29/2004 --
|
|
|
